How to Install Mikrotik Router OS

Sponsor Link

How do I install mikrotik ???... it is very easy man, even in doing only in a few minutes only,, please follow the tutorial below :

First,,you must download the iso file of Mikrotik router OS from mikrotik.com,Then write iso image file on CD,put in cdrom and turn on :



Press "a" key for select all and then press "i" , Answer "n" to first question and "y" to second



installation complete, remove cd from cdrom and press "Enter"

after rebooting type "admin" as login and no password.

When mikrotik prompt is ready assign ip to NIC:

/ip address
add address=192.168.1.2/24 interface=ether1
add address=192.168.0.1/24 interface=ether2

ether1 = WAN ( Connected To Your Router ) Alone -- ether2= LAN ( Connected To Your Switch (hub) With Clients --

now add gateway ip:

/ip route
add gateway=192.168.1.1 << your IP modem >>>


if use your ip now you can ping internet

ping 8.8.8.8
8.8.8.8 64 byte ping: ttl=242 time=255 ms
8.8.8.8 64 byte ping: ttl=242 time=243 ms
8.8.8.8 64 byte ping: ttl=242 time=247 ms
8.8.8.8 64 byte ping: ttl=242 time=243 ms
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 243/247.0/255 ms

NAT Configuration :

nat will use until client with invalid ip connect to internet, so we must run nat on mikrotik and set client ip in range of 192.168.0.2 and set client gateway to 192.168.0.1(Secend NIC of mikrotik)

/ip firewall nat
add chain=srcnat action=masquerade out-interface=ether1

just it,,,,it's very easy :D

Related Posts :